How to use a Chainsaw Safely [Step by Step Guide]

Chainsaws are influential & precious tools. They can be found on most farms & in homes where wood is cut for fireplaces or heating systems. They are also the most important cutting tool for almost half of the marketable timber shaped in Minnesota.

Nevertheless, regardless of the profit of chainsaw use, the possibilities for accidents when using a chainsaw is lofty & injuries sustained are frequently brutal.

Accident Components – Human, Agent, Environment

Chainsaw Safely

The person part refers to both the bodily & psychological condition of the worker. Working with a chainsaw calls for recognizing any personal restrictions, counting exhaustion & tediousness, which can decrease reaction time & increase the odds of an accident in the works.

Basic Field Maintenance

Protection preservation consists of field concentration to the necessary parts of a saw to keep it in well-organized & secure working condition. The worker’s manual should forever consult for items.

A wide activate guard and chain catch pin help defend the worker if the chain breaks or disengaged. If the chain breaks or jumps the bar, the catch pin will root the chain to bunch up, keeping it from outstanding the worker’s right arm.

Heat from the muffler from time to time ignites gasoline or dry forest tinder near the saw. Make sure that the muffler is in sound working condition.

Daily Operation Check

Taking care of the chain is the most vital, most frequently uncured for, & most hard characteristic of a daily operation check. Sharpening can be varied with high-quality outcome. Still, it is central to use the appropriate method for exact types of chain..

Suitable chain tension contributes to competent cutting & longer chain life & reduces the opportunity of the chain jumping the bar. For a hard-nosed bar, the correct tension must result in 1/16″ to 1/8″ of space between the foot of the bar and the tie straps between the teeth.

Safety Features:

  • Chain catcher
  • Muffler
  • Chain brake
  • Safety tip
  • Rubber mounted handlebar
  • Chain sharpness
  • Chain tension
  • Chain oilier
  • Air cleaner element
  • Idle adjustment

Personal Protective Equipment

Earlier than going into the field to activate a chainsaw, the worker must be confined with clothing & other kit planned to decrease the sternness of any accident.

Basic Felling Cuts

Every felling technique consists of 2 basic cuts with the chainsaw: the undercut and the back cut. The undercut clears a wedge-shaped piece of the trunk from the side to which the tree will fall.

Only ¼ to 1/3 of the tree’s width must be involved with the undercut. The back cut, made on the opposite side, lets the tree fall.

Basic felling cuts

 

Superior trees can from time to time be felled more with no trouble by using wedges made of wood. The wedges are motivated into the back cut behind the saw to the power the tree in the preferred way.

Removing Limbs and Bucking

Once the tree is on the ground, the limbs are normally removed, then the tree is “bucked,” or cut into smaller pieces. Fallen trees are frequently under tension depending on the way they are supported by the ground or their limbs.

General Operating Rules

Initially study to seem up as approaching a tree previous to cutting. Overhead hazards can comprise unsafe wires, other trees & movable branches.

Equilibrium is significant in scheming the saw. Move positions in its place of over extending arrive at & keep away from reaching above shoulder height.

Cutting hazards can be abridged by staying mindful of the factors so as to make it promising. A right place of the left hand, with the thumb wrapped just about the handlebar, provides the worker with a safer grasp of the saw.

While sawing, remain your eye on the tip or “kickback zone” of the bar. This is where the cutting teeth can obtain an extra-large bite off & move the saw’s control uphill toward the workers. Bribe can too take place if the tilt strikes another item as a shock or wreckage.

Previous to make first felling cut, there are at least 12 things to deem:

  • Bend
  • Branch allocation
  • Apparent work area
  • Mark to fell the tree
  • Get away route
  • Position of friend
  • Spot of vehicle
  • Existence of power lines
  • Proper cutting system
  • Attendance of rot,
  • Storm pace & way,
  • Any above your head hazards.

Lastly, build accident avoidance an individual objective. The most significant part of protection gear goes under skin & attitude.  You can see my another website about gardening tools for your garden

Brian Berkowitz
 

Brian Berkowitz is the Editor of bestchainsawexpert.com. Who is a Power Tools enthusiast and love to share what he know about this field. In personal life, he is a father of two cute kid and loving husband of a beautiful wife.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: